Regviz

Cypress Semiconductor /psoc63 /USBFS0 /USBDEV /USBIO_CR1

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as USBIO_CR1

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Cypress Semiconductor/psoc63/USBFS0/USBDEV/USBIO_CR1#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (DMO)DMO 0 (DPO)DPO 0 (RSVD_2)RSVD_2 0 (IOMODE)IOMODE

Description

USBIO control 1 Register

Fields

DMO

This read only bit gives the state of the D- pin when IOMODE bit is ‘0’ and USB doesn’t transmit. This bit is ‘0’ when USB transmits SE0, and this bit is ‘1’ when USB transmits other than SE0. This bit is valid if USB Device.
DPO

This read only bit gives the state of the D+ pin when IOMODE bit is ‘0’ and USB doesn’t transmit. This bit displays the output value of D+ pin when USB transmits SE0 or data. This bit is valid if USB Device.
RSVD_2

N/A
IOMODE

This bit allows the D+ and D- pins to be configured for either USB mode or bit-banged modes. If this bit is set the DMI and DPI bits are used to drive the D- and D+ pins.

Links

()

Register License

Copyright 2016-2018 Cypress Semiconductor Corporation \n Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License.
You may obtain a copy of the License at \n
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and
limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data